Screen Protectors for Omega x Swatch Speedmaster Moonswatch

Our top pick is the BROTECT Flex Full-Screen protector – it wraps precisely around the domed watch crystal and provides reliable all-round protection.

The BROTECT Flex Full-Screen protector is designed specifically for the domed acrylic crystal of the Omega x Swatch Speedmaster Moonswatch. Thanks to its highly flexible material, it hugs the curved shape exactly, leaving no uncovered edges. The scratch-resistant surface with self-healing properties lets minor scratches fade away on their own, while the crystal-clear film keeps the dial perfectly readable.

We currently only offer flexible film protectors for the Moonswatch, since the watch crystal is domed – a rigid glass protector wouldn't sit flush.

Screen protection generally comes in two materials: glass offers excellent impact protection thanks to its hardness, but it's rigid and only suits flat surfaces. Film is thinner and far more flexible, so it conforms to curved or domed surfaces as well. Because the crystal on the Omega x Swatch Speedmaster Moonswatch is domed, a rigid glass protector would chip at the edges or fail to sit properly at all. That's why we only carry flexible full-screen film protectors for this model, which mould exactly to the curve.

The self-healing coating means fine scratches on the film's surface typically fade away on their own within a short time.

The surface of the BROTECT Flex Full-Screen protector features a special self-healing coating. Minor scratches, like those that can happen from a jacket cuff or the edge of a table, usually vanish on their own within a few hours thanks to this property. This keeps the Moonswatch's domed crystal looking clear and easy to read without ever needing to replace the film.

Yes, the film is water- and sweat-resistant, and it wipes clean easily with a soft cloth whenever needed.

The BROTECT Flex Full-Screen protector is made from a sturdy, moisture-resistant material that handles both sweat during exercise and occasional contact with water without any issue. If the crystal gets dirty, a soft, slightly damp cloth is usually all it takes to get the surface streak-free again. The film's self-healing properties also mean everyday wear marks stay largely invisible.

Clean the crystal with the wet wipe, dry it with the cloth, centre the film, then smooth the air out from the middle towards the edges.

Start by thoroughly cleaning the watch crystal with the included wet wipe, then go over it with the dry cloth to remove any remaining dust particles. Centre the film over the dial and gently press the air out from the middle towards the edges. If a few small air bubbles remain visible after application, they typically disappear on their own within 2 to 3 days as the crystal applies gentle pressure. Since the BROTECT Flex protector comes as a set of 2, you'll have a spare on hand right away if the first attempt doesn't go perfectly.

A protector film is thin and flexible and mainly reduces scratches; tempered glass is rigid and usually offers more impact and drop protection.

A protector film (PET or TPU) is very thin and flexible, so it conforms well to edges and slight curves. Its main job is to reduce everyday scratches and abrasion while keeping the display look natural.

Tempered glass is much more rigid and is often rated up to 9H hardness. Because of its stiffness, it can absorb more energy from impacts and drops and typically fractures in a more controlled way.

If you want a discreet, flexible solution—especially on curved screens—a protector film is often the better construction.

Clean the screen thoroughly, work in a low-dust area, and smooth the film down slowly from one side to the other.

A bubble-free install depends on cleanliness and a steady application.

• Degrease the screen with a cleaning wipe, then dry it completely.
• Work in a low-dust environment (for example, after a short hot shower to settle dust).
• Align the film, tack down one edge, and lower it slowly.
• Use a card/squeegee to push air out from the center to the edges.
• If you spot dust, lift the film carefully, remove the speck with tape, and press back down.

Small remaining bubbles often fade after a short time once the adhesive fully settles.

Yes, we ship worldwide. Shipping is even free to many European countries like the UK, France, and Switzerland.

If you are ordering to a country not on our free shipping list, the specific shipping costs will be shown transparently in the shopping cart.

Delivery takes 2-4 days to the UK, and usually 2-5 days to other European countries. Worldwide shipping times vary.

We process your order within 24 hours on working days.

Typical delivery times:

• UK, Austria, Switzerland: 2-4 working days
• Germany: 1-3 working days
• France, Italy, Spain: 2-5 working days