Screen Protectors for Coros Apex Pro

Clean the screen thoroughly, work in a low-dust area, and smooth the film down slowly from one side to the other.

A bubble-free install depends on cleanliness and a steady application.

• Degrease the screen with a cleaning wipe, then dry it completely.
• Work in a low-dust environment (for example, after a short hot shower to settle dust).
• Align the film, tack down one edge, and lower it slowly.
• Use a card/squeegee to push air out from the center to the edges.
• If you spot dust, lift the film carefully, remove the speck with tape, and press back down.

Small remaining bubbles often fade after a short time once the adhesive fully settles.

A protector film is thin and flexible and mainly reduces scratches; tempered glass is rigid and usually offers more impact and drop protection.

A protector film (PET or TPU) is very thin and flexible, so it conforms well to edges and slight curves. Its main job is to reduce everyday scratches and abrasion while keeping the display look natural.

Tempered glass is much more rigid and is often rated up to 9H hardness. Because of its stiffness, it can absorb more energy from impacts and drops and typically fractures in a more controlled way.

If you want a discreet, flexible solution—especially on curved screens—a protector film is often the better construction.

Protector films are typically made from PET (polyester) or TPU (thermoplastic polyurethane).

PET is a clear polyester material that is dimensionally stable and forms a smooth surface. It is commonly used for thin, transparent films.

TPU is an elastic thermoplastic polyurethane. It is more flexible than PET and can partially level out minor surface marks thanks to its material elasticity (self-healing).

Depending on the version, the top layer may include a coating to reduce fingerprints and make cleaning easier.

Clean the display thoroughly, align the film exactly, and smooth it out with a card.

It's best to use a dust-free room like the bathroom. A credit card wrapped in a cloth makes an ideal squeegee.

Also check out our installation video.

Yes, 100%. Touch sensitivity is not affected.

Our films are designed to be 'invisible' to the technology. Capacitive touchscreens react immediately.
Important for in-display fingerprint sensors: We especially recommend our thin films or Hybrid Glass here, as these (unlike thick real glass) usually do not interfere with the sensor.

Custom-made products are excluded from the right of withdrawal as they are produced specifically for you. Warranty claims apply for defects, of course.

Since we cut custom-made products individually according to your specifications, we cannot take them back if you simply "don't like them".

However, if the film has a quality defect or does not fit (despite correct details), please contact our support for a solution.