BROTECT AirGlass Matte Glass Screen Protector for Panasonic KX-TG6422

Glass films are often best for drop protection on phones, films are flexible, privacy filters block side views. This category sits in between: glass-like, 9H scratch-resistant, and matte.

Here’s a practical overview:

• Glass film / screen glass: usually more rigid, very clear look, often coated; on smartphones it’s often the go-to choice when you also want impact protection.
• Protective film (PET/TPU): thin and flexible, good everyday scratch protection, often strong edge adhesion on curved screens, but less impact cushioning.
• Privacy filter: reduces side viewing for travel/office use, can slightly darken the display.

The BROTECT AirGlass Matt Glas Panzer-Folien is a glass-like film with a 9H coating and a matte anti-glare surface. It gives you a more stable, scratch-resistant surface than classic films and is especially useful if you want fewer reflections. For stationary devices (e.g., laptops/monitors), films or flexible hybrid solutions can be convenient for touch/hygiene and easy cleaning.

Clean the screen thoroughly, work in a dust-free area, align carefully, and push bubbles outwards from the center.

For a bubble-free application, follow these steps:

• Wash your hands and work in the cleanest, least dusty area possible.
• Clean the screen with a microfiber cloth and make sure it’s completely dry.
• Remove the backing, align the film (use speaker/cutouts as guides), and place it down gently.
• Press from the center to the edges with a card or soft squeegee to push out air.
• Small remaining bubbles often disappear after a short time.

Tip: Smudges can usually be wiped off easily with a microfiber cloth.

The BROTECT AirGlass Matt Glas Panzer-Folien is a strong choice: matte, 9H scratch-resistant, and practical for daily use.

If you want fewer reflections and prefer a tougher surface, the BROTECT AirGlass Matt Glas Panzer-Folien is a solid option. The matte finish reduces glare, the 9H coating helps prevent scratches, and the anti-fingerprint layer makes cleaning easier. Classic PET/TPU films are usually more flexible but often feel softer. If you don’t see alternatives in the shop, your device may only be offered in this category.

Clean the display thoroughly, align the film exactly, and smooth it out with a card.

It's best to use a dust-free room like the bathroom. A credit card wrapped in a cloth makes an ideal squeegee.

Also check out our installation video.

Yes, 100%. Touch sensitivity is not affected.

Our films are designed to be 'invisible' to the technology. Capacitive touchscreens react immediately.
Important for in-display fingerprint sensors: We especially recommend our thin films or Hybrid Glass here, as these (unlike thick real glass) usually do not interfere with the sensor.

Custom-made products are excluded from the right of withdrawal as they are produced specifically for you. Warranty claims apply for defects, of course.

Since we cut custom-made products individually according to your specifications, we cannot take them back if you simply "don't like them".

However, if the film has a quality defect or does not fit (despite correct details), please contact our support for a solution.