We recommend the BROTECT AirGlass screen protector: 9H hardness, ultra-thin, anti-fingerprint coating – maximum protection with full touch sensitivity.

For the Fairphone 6, we recommend the BROTECT AirGlass screen protector. This flexible hybrid glass film combines the scratch resistance of glass (9H hardness) with the flexibility of a film.

• 9H hardness: Reliable protection against keys, sand, and other sharp objects in daily use.
• Ultra-thin and ultra-light: Thinner than conventional glass protectors – original touch sensitivity is fully preserved.
• Oleophobic anti-fingerprint coating: Grease and fingerprints wipe off effortlessly.
• Made in Germany: Precision laser-cut and shipped directly from the manufacturer.

The combination of mechanical protection and minimal thickness makes this the ideal screen protector for the flat display of the Fairphone 6.

Yes. Glass protectors and standard screen protectors for the Fairphone 6 are generally case-compatible, as they do not extend beyond the device's bezel.

Most screen protection options for the Fairphone 6 are cut to work seamlessly alongside protective cases:

• Glass protectors (e.g. BROTECT AirGlass): With an added thickness of just a fraction of a millimetre, the protector sits flush within the display area and does not overhang the device edges, so it will not conflict with a case frame.
• Plastic screen protectors: These are even thinner than glass protectors and are virtually always case-compatible in practice.
• Tip for cases with wide inner frames: Cases with a particularly wide inner bezel may occasionally exert slight pressure on the edges of the protector. In this situation, a protector cut slightly smaller than the display (a case-friendly cut) is worth considering.

No edge-to-edge glass options extending to the device's side edges are available for the Fairphone 6 in this range, so the risk of case conflicts is inherently low.

Glass protectors offer better impact resistance with 9H hardness; films are thinner and more affordable. For drop protection, a glass protector is the better choice.

The choice between a glass protector and a plastic film depends on your usage habits:

• Glass protectors (e.g. BROTECT AirGlass, upscreen Hybrid Glass): With 9H hardness, they provide significantly better resistance to point-impact stress such as edge drops. The oleophobic coating also noticeably reduces fingerprint smudges. Ideal for users who carry their device actively throughout the day.
• Plastic screen protectors (e.g. ScreenLeaf Clear, BROTECT HD-Clear): Extremely thin and nearly invisible. They reliably protect against everyday scratches while preserving the original display feel. A good choice when minimal added thickness is a priority.

Both types are compatible with the flat display of the Fairphone 6. If you want scratch protection combined with impact resistance, a glass protector is the more suitable option.

Yes. The BROTECT Privacy film blocks side views up to 60°, filters blue light, and protects against scratches – ideal for public transport and the office.

A privacy screen protector like the BROTECT Privacy for the Fairphone 6 uses an integrated micro-louvre filter: the display remains clearly visible from straight ahead, while appearing dark to anyone viewing from an angle of roughly 60° or more to the side.

• Side-view protection up to 60°: Sensitive content such as emails, banking apps, or messages stays invisible to people next to you.
• Blue light filter: The film reduces the blue light component of the display, which may help reduce eye strain during extended screen use.
• Scratch protection: The anti-scratch coating also protects the display glass from everyday wear.
• Easy application: The silicone adhesive layer allows bubble-free, residue-free installation and removal.

Note: Due to the filter structure, the display will appear slightly darker than with a clear film – this is inherent to the technology and common to all privacy screen protectors.

Clean the display, choose a dust-free environment, align the protector, then press it down evenly from one side. Small bubbles usually disappear on their own.

A professional application takes only a few steps:

• Preparation: Thoroughly clean the display with the included microfibre cloth and alcohol wipe. Remove any remaining dust particles with the dust-removal sticker typically included in the package.
• Environment: Choose the most dust-free location possible. A recently wiped bathroom works well, as the humidity helps bind airborne dust particles.
• Alignment: Position the protector over the display before removing the backing. Check alignment at all edges and cut-outs.
• Application: Gradually peel off the backing and press the protector down evenly from one side to the other using the included squeegee card or applicator.
• Bubbles: Small air bubbles in PET films typically disappear within 24–48 hours. Persistent bubbles can be carefully pushed toward the nearest edge with the squeegee.

With glass protectors like AirGlass, the electrostatic adhesive layer virtually self-positions the film – careful alignment before placing it down is especially important here.

For drop protection, glass is often the first choice; upscreen Spy Shield Sichtschutz-Folien is a film and is mainly about privacy, flexibility, and everyday scratch protection.

It depends on your priority:

• On the go: Glass protectors are often better if you want more impact/drop protection.
• Everyday flexibility: Films are thin, conform well to edges, and protect against scratches.
• Privacy: upscreen Spy Shield Sichtschutz-Folien belongs to specialty films because the focus is side-view privacy.

If privacy matters more than maximum impact resistance, upscreen Spy Shield Sichtschutz-Folien is typically the better fit than standard glass.

Clean the surface, align upscreen Spy Shield Sichtschutz-Folien carefully, then press from the center outward in a low-dust environment.

For a bubble-free application:

• Wash your hands and clean the surface with a microfiber cloth.
• Remove dust (for example with a piece of tape) before placing the film.
• Align upscreen Spy Shield Sichtschutz-Folien, set one edge first, and lower it slowly.
• Smooth from the center to the edges using a card or a soft cloth.

If small bubbles remain, wait a bit and gently push them toward the edge. For cleaning, a microfiber cloth is usually enough; for heavier dirt, use a mild glass cleaner without abrasives.

Yes. upscreen Spy Shield Sichtschutz-Folien reduces side viewing so content is much harder to see from an angle.

upscreen Spy Shield Sichtschutz-Folien is designed as a privacy film.

• From the front, the screen typically remains readable.
• From the side, the display appears darker and less clear.
• The top coating also helps protect against scratches.

The perceived effect can vary with viewing angle and ambient light.

upscreen Spy Shield Sichtschutz-Folien is a privacy screen protector film that reduces side viewing and helps protect the surface from scratches.

upscreen Spy Shield Sichtschutz-Folien combines privacy protection with everyday surface protection.

• Reduces side viewing so onlookers have a harder time seeing your content.
• Helps protect the surface from scratches and common wear.
• As a film, it is thin and flexible and typically adheres well along edges.

If you mainly want impact/drop protection, a glass protector is usually stronger; upscreen Spy Shield Sichtschutz-Folien focuses on privacy and scratch protection.

Yes, we ship worldwide. Shipping is even free to many European countries like the UK, France, and Switzerland.

If you are ordering to a country not on our free shipping list, the specific shipping costs will be shown transparently in the shopping cart.