For the XCover 7, we recommend the BROTECT AirGlass: an ultra-thin glass film with 9H hardness, high clarity, and an anti-fingerprint coating.

The BROTECT AirGlass is one of the most popular screen protectors for the XCover 7. It combines the scratch resistance of tempered glass (9H) with a notably thin and light build that's more flexible than standard glass films.

• High transparency for a crisp, sharp display
• Anti-fingerprint coating that resists smudges
• Flexible adhesive layer for bubble-free application

Since the XCover 7 has a flat display, the glass film sits flush edge-to-edge without lifting at the corners.

Clean the display thoroughly, work in a dust-free space, line the protector up carefully with the edges, then press bubbles out gently from the center outward.

Clean, dust-free preparation makes the biggest difference to how the installation turns out.

• Clean the display thoroughly and remove any residue completely
• Choose as dust-free a space as possible, such as a bathroom right after a hot shower
• Line the protector up precisely with the edges of the housing before placing it
• Press from the center outward so bubbles are pushed evenly toward the edges

With some materials, such as self-healing films, any tiny remaining bubbles tend to disappear on their own within a few days.

Yes, the BROTECT Privacy film blocks side views from around 60 degrees and also guards against scratches and blue light.

The BROTECT Privacy protector darkens the display as soon as someone looks at it from the side, keeping messages, codes, or sensitive content private on the bus, train, or in an open-plan office.

• Blocks side views from roughly a 60-degree angle
• Scratch protection via an additional hard coating
• Reduces blue light emission by about 35-60%

Viewed straight on, the display stays fully readable, and touch response is unaffected by the film.

For everyday use, we recommend tempered glass since it absorbs impacts better. A thinner film suits you if maximum touch sensitivity matters more.

Both materials guard reliably against scratches, but they behave differently in a drop. Tempered glass with 9H hardness absorbs impact energy and helps prevent cracks in the original display.

• Tempered glass: stronger impact protection, pleasant feel, slightly thicker
• Screen protector film: ultra-thin, highly flexible, usually cheaper

Both options are available for the XCover 7. If you use the device outdoors or on the job, a glass film like AirGlass is generally the safer choice.

Yes, our tempered glass and film protectors for the XCover 7 are cut close to the edge and work with most standard cases.

A screen protector and a case need to work together so the case doesn't lift and touch response isn't affected.

• The cut ends just short of the frame, so standard cases sit flush against it
• Cutouts for the camera, sensors, and speaker are already accounted for
• With especially bulky rugged cases, it can help to fit the case first before applying the protector

Given the XCover 7's rugged housing, several glass protectors in our range are specifically designed to be case-friendly.

Tempered glass is better for drop protection, while a matte film like upscreen Reflection Shield Matt Schutzfolien focuses on glare reduction and flexibility.

Tempered glass is rigid and better suited for absorbing impact from drops.

A matte film such as upscreen Reflection Shield Matt Schutzfolien is thinner and reduces reflections more effectively.

For office or indoor lighting conditions, the matte film often offers more visual comfort.

Clean the screen carefully and smooth the film down slowly from one side.

Ensure the display is free from dust and grease before installation.

• Use a microfiber cloth.
• Align the film precisely.
• Apply from one edge.
• Push air outward with a card.

The silicone adhesive allows clean positioning and residue-free removal.

They are made of polyester with a functional hard coating and a silicone adhesive layer.

upscreen Reflection Shield Matt Schutzfolien are based on a polyester film with a functional hard coating.

The surface is matte and includes an anti-fingerprint finish.

A removable silicone adhesive layer ensures adhesion to the display.

They are matte, anti-glare films that reduce reflections while protecting against scratches.

upscreen Reflection Shield Matt Schutzfolien are matte screen protector films with an anti-glare surface.

The functional hard coating helps reduce everyday scratches, while the matte finish visibly lowers reflections.

Compared to clear tempered glass, the focus here is on reflection reduction and a softer screen appearance.

Yes, we ship worldwide. Shipping is even free to many European countries like the UK, France, and Switzerland.

If you are ordering to a country not on our free shipping list, the specific shipping costs will be shown transparently in the shopping cart.