Yes, all films can be wiped clean with a damp cloth. TPU and glass films resist sweat and moisture, making them suitable for sports use.

The Xplora X6 Play 2025 is frequently worn during sports and physical activity, so the cleaning ability and moisture resistance of a screen protector are important considerations:

• Wipeability: All available films can be cleaned with a lightly damp microfibre cloth or a display cleaning wipe. The oleophobic or anti-fingerprint coating prevents grease and dirt from penetrating the surface.
• Sweat resistance: TPU films (e.g. BROTECT Flex Full-Screen) and glass films (e.g. BROTECT AirGlass) are resistant to moisture and sweat — their adhesive layer maintains a firm hold and does not lift when exposed to dampness.
• Cleaning agents: Avoid aggressive solvents or high-concentration alcohol. A slightly damp cloth or a dedicated display cleaner is sufficient for daily maintenance.
• Touch function: Touch sensitivity is maintained even when the film surface is lightly moist; watch operation is not affected.

Clean the display, work in a dust-free environment, align the film from the center outward and smooth it with the card. Any remaining bubbles will vanish within days.

A clean, bubble-free application is straightforward if you follow these steps:

• Clean the display: Use the included microfibre cloth to remove all fingerprints, grease, and dust. A dust sticker helps pick up stubborn particles that a cloth cannot remove.
• Choose a dust-free environment: A bathroom right after a shower is a well-known trick — steam in the air settles dust particles and significantly reduces contamination during application.
• Align before peeling: Hold the film above the display before removing the backing layer, and check alignment against the camera and sensors.
• Apply from center to edges: Place the film in the center first, then use the included squeegee or a card to slowly push it outward toward the edges, forcing air bubbles out evenly.
• Remaining bubbles: Small residual bubbles in TPU films (e.g. Flex Full-Screen) typically disappear within 2–3 days as the adhesive layer conforms to the display surface with body heat.

The BROTECT AirGlass screen protector (SKU 3859860) is the top choice: 9H hardness, ultra-thin glass film with anti-fingerprint coating.

For the Xplora X6 Play 2025 (2nd generation), the BROTECT AirGlass glass film is the recommended screen protector. It merges the scratch resistance of tempered glass (9H hardness) with the flexibility of a film, making it roughly twice as thin and light as conventional glass protectors.

• 9H hardness: Reliably protects against scratches from keys, sand, and everyday objects.
• Oleophobic coating: Fingerprints and smudges wipe off easily without affecting touch sensitivity.
• Ultra-thin and lightweight: Barely noticeable on the watch face, adding no significant bulk.
• Bubble-free application: The specially formulated adhesive layer glides onto the display smoothly, leaving no air pockets.

If the display has a curved edge, the BROTECT Flex Full-Screen film (SKU 5159860) is a complementary option designed specifically for curved surfaces.

Yes, the upscreen Bacteria Shield film (SKU 2059860) eliminates bacteria on the surface via active metal oxides, certified to ISO 22196.

Smartwatch displays are touched intensively every day and come into regular contact with skin — making them a source of bacterial contamination. The upscreen Bacteria Shield film addresses exactly this:

• Antibacterial action: Active metal oxides are integrated directly into the film surface and continuously reduce bacteria on the display. The technology is certified to the antimicrobial standard ISO 22196, tested by the accredited Qualitylabs BT GmbH laboratory in Nuremberg, Germany.
• Safe for humans: The metal oxides act exclusively against bacteria and are harmless to skin and the human body.
• Durability: The antibacterial coating is solvent-resistant and retains its effectiveness even with frequent cleaning.
• Touch compatibility: The display's full multi-touch sensitivity is preserved.

This film is particularly beneficial for users who wear the device during sports or in hygiene-sensitive environments, and for children who frequently touch the display.

Glass films offer superior scratch resistance (9H hardness); plastic/TPU films are more flexible and conform better to curved edges.

The choice between a glass film and a plastic film depends on your priorities:

• Glass film (e.g. BROTECT AirGlass): Rated at 9H on the Mohs hardness scale, resisting scratches from metal objects and keys. The smooth surface closely mimics the feel of the original display. Limitation: slightly less flexible at strongly curved edges.
• Plastic/TPU film (e.g. BROTECT Flex Full-Screen): Highly flexible material that conforms seamlessly to curved display edges, providing full-coverage protection. Many TPU films include self-healing properties that gradually erase minor micro-scratches. Scratch resistance is below that of glass, but for a smartwatch subject to wrist movement, the edge-to-edge coverage is a practical advantage.

For the Xplora X6 Play 2025 with its curved display, a flexible TPU film is particularly useful when full-edge coverage is a priority. If scratch resistance is the primary concern, a glass film is the better choice.

For drop protection, tempered glass is usually stronger; for flexible fit and a matte surface, BROTECT Matt Schutzfolien is the film option.

It depends on what matters most to you.

• On the go: Tempered glass is stiffer and often handles impacts and drops better.
• Everyday use: BROTECT Matt Schutzfolien is thin and flexible, focusing on scratch protection and a matte, lower-glare surface.
• If privacy matters: There are dedicated privacy options; that is a different material concept than a standard matte film.

If you mainly want a matte finish and reliable edge adhesion, BROTECT Matt Schutzfolien is typically the right choice category-wise.

BROTECT Matt Schutzfolien is a matte screen film that helps reduce scratches and can noticeably cut reflections.

BROTECT Matt Schutzfolien is a matte protective film. It is thin, flexible, and helps protect against everyday scratches.

• Matte surface can visibly reduce glare and distracting reflections
• Surface is easier to keep clean in daily use
• Flexible material adapts well and usually adheres reliably at the edges

Compared with tempered glass, BROTECT Matt Schutzfolien focuses on scratch and glare reduction rather than maximum impact protection.

Clean thoroughly, work dust-free, and smooth the film from the center outward.

This is usually the best way to apply BROTECT Matt Schutzfolien:

• Wash your hands and clean the surface thoroughly
• Choose a low-dust environment
• Align the film on one edge first, then lower it slowly
• Use a card or soft cloth to smooth from the center outward
• Let tiny remaining bubbles settle briefly, then gently push them out

If the film settles evenly during application, that also helps reduce bubbles.

Yes. The matte surface of BROTECT Matt Schutzfolien can visibly reduce reflections without noticeably affecting use.

The matte finish of BROTECT Matt Schutzfolien diffuses light, which often makes reflections look much weaker.

• Glare and reflections can be less distracting
• Fingerprints are often less visible and easier to wipe off
• Touch response is usually normal when the film is clean and applied correctly

A clean surface before installation helps prevent dust from affecting the feel.

Yes, we ship worldwide. Shipping is even free to many European countries like the UK, France, and Switzerland.

If you are ordering to a country not on our free shipping list, the specific shipping costs will be shown transparently in the shopping cart.