It is scratch-resistant, suitable for daily use and easy to wipe clean.

The surface of the BROTECT matte screen protector is scratch-resistant and designed for continuous use in the vehicle environment. It withstands typical everyday stresses from finger operation and light contact. Thanks to the anti-fingerprint coating, fingerprints, dust and dirt can be removed easily with a soft, slightly damp cloth. Avoid aggressive cleaners or abrasive sponges to preserve the matte structure and the special coating over time.

It is a matte plastic film that protects against scratches and reflections.

This BROTECT matte screen protector is a specially coated, matte plastic film that is applied directly onto the glass surface of the Carpuride W702 7" display. Its robust surface is scratch-resistant and forms a protective barrier between the environment and the display glass. The matte texture diffuses incoming light and thus reduces reflections without distorting the displayed content. When installed correctly and without tension, the touchscreen responsiveness of the device remains unchanged.

Yes, the matte surface clearly reduces glare and improves readability.

The BROTECT matte screen protector is designed as an anti-reflective film and effectively reduces glare on the Carpuride W702 7" display. Its finely textured matte surface scatters incident light instead of reflecting it directly back to your eyes, which reduces disturbing reflections. This makes screen content easier to read even in challenging lighting conditions. At the same time, the surface is optimized so that text and icons remain sharp and clearly visible.

It is precisely cut, matte and protects the display from scratches and reflections.

The 2x BROTECT Matte Screen Protector for Carpuride W702 7" is a suitable choice because it is custom-cut for this 7-inch display and therefore fits accurately. Its matte surface significantly reduces reflections, so the screen remains easier to read under sunlight or strong ambient light. The durable coating adds an extra scratch-resistant layer on top of the display glass, protecting it from everyday wear and tear. In addition, the anti-fingerprint finish makes it easier to wipe off smudges and fingerprints, keeping the screen clearer for longer.

Clean the display thoroughly, work in a dust-free area and align the film carefully.

For a bubble-free installation, first clean the Carpuride W702 7" display thoroughly from dust, grease and fingerprints using a lint-free cloth. Work in a dust-free environment so that no particles are trapped between display and film. Then slowly peel off the backing layer, align the BROTECT matte screen protector precisely with the edges and let it gently settle onto the screen. Any remaining air bubbles can be pushed out towards the edges with a suitable card or squeegee.

BROTECT Matt Schutzfolien is a matte screen film that helps reduce scratches and can noticeably cut reflections.

BROTECT Matt Schutzfolien is a matte protective film. It is thin, flexible, and helps protect against everyday scratches.

• Matte surface can visibly reduce glare and distracting reflections
• Surface is easier to keep clean in daily use
• Flexible material adapts well and usually adheres reliably at the edges

Compared with tempered glass, BROTECT Matt Schutzfolien focuses on scratch and glare reduction rather than maximum impact protection.

Clean thoroughly, work dust-free, and smooth the film from the center outward.

This is usually the best way to apply BROTECT Matt Schutzfolien:

• Wash your hands and clean the surface thoroughly
• Choose a low-dust environment
• Align the film on one edge first, then lower it slowly
• Use a card or soft cloth to smooth from the center outward
• Let tiny remaining bubbles settle briefly, then gently push them out

If the film settles evenly during application, that also helps reduce bubbles.

For drop protection, tempered glass is usually stronger; for flexible fit and a matte surface, BROTECT Matt Schutzfolien is the film option.

It depends on what matters most to you.

• On the go: Tempered glass is stiffer and often handles impacts and drops better.
• Everyday use: BROTECT Matt Schutzfolien is thin and flexible, focusing on scratch protection and a matte, lower-glare surface.
• If privacy matters: There are dedicated privacy options; that is a different material concept than a standard matte film.

If you mainly want a matte finish and reliable edge adhesion, BROTECT Matt Schutzfolien is typically the right choice category-wise.

Yes. The matte surface of BROTECT Matt Schutzfolien can visibly reduce reflections without noticeably affecting use.

The matte finish of BROTECT Matt Schutzfolien diffuses light, which often makes reflections look much weaker.

• Glare and reflections can be less distracting
• Fingerprints are often less visible and easier to wipe off
• Touch response is usually normal when the film is clean and applied correctly

A clean surface before installation helps prevent dust from affecting the feel.

Yes, we ship worldwide. Shipping is even free to many European countries like the UK, France, and Italy.

If you are ordering to a country not on our free shipping list, the specific shipping costs will be shown transparently in the shopping cart.