Clean the display thoroughly, work in a dust-free environment and follow the included installation guide. Any remaining small bubbles will usually disappear on their own within 2–3 days.

A successful, bubble-free installation of the BROTECT Flex Full-Screen protector requires a little preparation. Follow these steps:

• Clean the display: Remove all fingerprints and dust particles using a microfiber cloth and the included cleaning wipe. Make sure no residue is left behind.
• Dust-free environment: Apply the protector in a low-dust room – for example right after a shower, as steam settles airborne dust.
• Position the film: Align the protector using the cutouts before pressing it down fully.
• Smooth out bubbles: Glide the film from the center outward using a credit card or the included applicator.
• Patience with remaining bubbles: Small bubbles left after installation will disappear within 2–3 days as the adhesive layer settles.

An installation video is available from the manufacturer and is recommended for best results.

Yes, the BROTECT Flex film is wipeable and easy to care for. A slightly damp microfiber cloth is sufficient for daily cleaning – avoid abrasive or solvent-based cleaners.

With the BROTECT Flex Full-Screen protector applied, cleaning the Omega x Swatch Speedmaster Moonswatch display is just as straightforward as without protection. The film material is resistant to everyday moisture and dirt.

• Daily cleaning: A slightly dampened microfiber cloth removes fingerprints and smudges without leaving residue or damaging the film.
• No aggressive cleaners: Solvent-based cleaners, high-concentration alcohol, or abrasive cloths can attack the adhesive or film surface and should be avoided.
• Everyday moisture resistance: The film holds firmly against splash water and sweat generated during normal watch wear.
• Self-healing micro-scratches: Fine cleaning marks disappear on their own within a short time thanks to the self-healing coating.

The BROTECT Flex Full-Screen protector is precision-cut for the curved display of the Omega x Swatch Speedmaster Moonswatch, providing full-surface protection against scratches and dust.

The BROTECT Flex Full-Screen protector is custom-fitted to the Omega x Swatch Speedmaster Moonswatch, covering the entire curved display without gaps. The flexible material conforms to curved surfaces and bonds securely thanks to a strong adhesive layer – no bubbles or edge lifting.

• Precision cut for the Omega x Swatch Speedmaster Moonswatch (Made in Germany)
• Full-surface coverage (Full Screen) even on curved displays
• Guards against everyday scratches and dust
• Package includes 2 screen protectors

Our top pick is the BROTECT Flex Full-Screen protector – it wraps precisely around the domed watch crystal and provides reliable all-round protection.

The BROTECT Flex Full-Screen protector is designed specifically for the domed acrylic crystal of the Omega x Swatch Speedmaster Moonswatch. Thanks to its highly flexible material, it hugs the curved shape exactly, leaving no uncovered edges. The scratch-resistant surface with self-healing properties lets minor scratches fade away on their own, while the crystal-clear film keeps the dial perfectly readable.

Yes. The BROTECT Flex film features a self-healing coating that allows fine surface scratches to disappear on their own within a few days through molecular movement.

The BROTECT Flex Full-Screen protector for the Omega x Swatch Speedmaster Moonswatch is equipped with a self-regenerating surface coating. This is particularly valuable for a premium watch worn daily on the wrist, where minor abrasion is unavoidable.

• How self-healing works: The soft top layer of the film has high molecular mobility. Fine scratches – from sleeve contact or light touches – are largely smoothed out within 1 to 3 days at room temperature.
• Heat accelerates the process: Gentle warmth, such as body heat from wearing the watch, can further support the regeneration.
• Limits of self-healing: Deep scratches caused by sharp edges or heavy pressure cannot be fully reversed. In those cases the film still acts as a sacrificial layer protecting the watch crystal itself.
• Long-term clarity: Continuous self-regeneration keeps the film clearer and visually cleaner for longer than conventional films without this coating.

We currently only offer flexible film protectors for the Moonswatch, since the watch crystal is domed – a rigid glass protector wouldn't sit flush.

Screen protection generally comes in two materials: glass offers excellent impact protection thanks to its hardness, but it's rigid and only suits flat surfaces. Film is thinner and far more flexible, so it conforms to curved or domed surfaces as well. Because the crystal on the Omega x Swatch Speedmaster Moonswatch is domed, a rigid glass protector would chip at the edges or fail to sit properly at all. That's why we only carry flexible full-screen film protectors for this model, which mould exactly to the curve.

Clean the crystal with the wet wipe, dry it with the cloth, centre the film, then smooth the air out from the middle towards the edges.

Start by thoroughly cleaning the watch crystal with the included wet wipe, then go over it with the dry cloth to remove any remaining dust particles. Centre the film over the dial and gently press the air out from the middle towards the edges. If a few small air bubbles remain visible after application, they typically disappear on their own within 2 to 3 days as the crystal applies gentle pressure. Since the BROTECT Flex protector comes as a set of 2, you'll have a spare on hand right away if the first attempt doesn't go perfectly.

It is made from a flexible plastic material with a smooth, self-healing surface and a removable adhesive layer.

The film is made from a flexible plastic material. A smooth, self-healing surface can make fine everyday marks less noticeable over time.

• Surface: smooth and easy to wipe clean
• Look: clear and transparent
• Adhesive: removable and designed to leave no residue

Clean the screen well, work in a low-dust area, and press the film from the center outward.

For the most bubble-free result with BROTECT Flex Full-Screen Folien:

• Wash your hands and work in a low-dust environment.
• Clean the screen thoroughly and let it dry completely.
• Align the film, then press from the center outward.
• Push small air pockets to the edges and press the borders down carefully.

Tip: A soft cloth helps apply even pressure without scratching the surface.

Yes, we ship worldwide. Shipping is even free to many European countries like the UK, France, and Switzerland.

If you are ordering to a country not on our free shipping list, the specific shipping costs will be shown transparently in the shopping cart.